*CLIO STANDARD* (rel 8.5)

  • $1,704.00
Purchase
Add Qc Functionality

Turns your PC into the most complete easy-to-use electrical and acoustical measurement system ....

CLIO Systems are the easiest and less expensive way to measure:

  • - electrical networks
  • - electronic equipment
  • - loudspeaker systems
  • - telephones & hearing aids
  • - environmental noise
  • - rooms acoustics
  • - quality of production lines


CLIO runs on a standard PC computer driving the measurement hardware and accessories supplied by Audiomatica; the power, precision and reliability of the resulting instrument is 100% warranted. Software REV 8 is a new design based on a huge work which is the synthesis of more than 16 years experience and excellence in electro-acoustic measurement systems and gives you all the power and flexibility you need. It refines all the well established measurement techniques already implemented in the CLIO system while adding several new functionalities. Software REV 10.0 is the newest high bandwidth/high performance code that runs exclusively on CLIO Fw

CLIO is offered in different packages adapted to run the available Audiomatica analyzer hardware systems of your choice.

  1. CLIO FW: Includes the FW-01 Firewire Audio Interface for 24 bit @ 192kHz resolution.
  2. CLIO Standard: includes the SC-02 + PB4281 PCI/USB Audio Interface for 18 bit @ 48kHz resolution.
  3. CLIO LITE is a reduced functionality version running on the same hardware as CLIO Standard: SC-02 + PB4281 PCI/USB Audio Interface for 18 bit @ 48kHz resolution.
  4. Qc EXTENSIONS are available as an option for both CLIO Fw and CLIO Standard hardware for state-of-the-art testing and controlling a production line. (not available for CLIO LITE)


CLIO MEASUREMENT TECHNIQUES

Compared to other measurement systems, CLIO concentrates the power of many different instruments into a single one.

Three different measurement techniques are available for system identification and characterization:
- MLS & LogChirp analysis using either pseudo-random noise or logarithmic chirps as stimuli
- Sinusoidal Sweeps using sinusoidal signals
- FFT, RTA and 'Live' Transfer Function letting you the choice of any stimulus, even live music.
While other instruments offer one single possible measurement choice, CLIO gives you three alternatives permitting to view the physical phenomenon like frequency response, impedance or other parameters, from three different points of view. The final result will be then validated by the consistency of these measurements: as any expert technician knows, this is the correct approach that should always be adopted.

The following specialized control panels are dedicated to other specific measurements:
- Sound Level Meter a complete IEC61672 integrating sound level meter with Leq and frequency analysis
- Linearity and Distortion measures the non linear behavior of an electronic equipment
- Interactive L-C-R Bridge permits passive components measurement on the fly
- Wow&Flutter Meter with time and frequency analysis
- Frequency Counter

Beyond measured results you get sophisticated post-processing tools for:
- Thiele&Small Parameters for loudspeaker characterization
- ISO 3382 Acoustical Parameters for rooms and auditoria characterization
- Waterfall plots to evaluate sound decay as 3D or Color graphs
- Directivity analysis for loudspeaker characterization as Color maps, Circular or 3D plots

- Wavelet analysis for joint time-frequency loudspeaker characterization

CLIO Lite vs. CLIO Standard

1) MLS & Log Chirp
-No Log Chirp
-Size limited to 32k
-Group Delay disabled
-No Octave Filter Post-processing
-No MLS Impedance measurements

2) Waterfall & Directivity
 -Only Waterfall, No Directivity.

3) No Wavelet Analysis

4) No Acoustical Parameters

5) FFT
 -Only RTA measurements
-No FFT Narrowband
-No Live Transfer Function

6) Sinusoidal
 -No fourth, fifth harmonic and THD display.

7) T&S Parameters
 -No LSE analysis

8) No Leq Analysis

9) No Linearity & Distortion Analysis

10) Signal Generator
 -No Multi-tones
-No All tones
-No Chirp

End User Pricing of all CLIO measurement systems:
  • CLIO Standard: $1704.00
  • CLIO Fw: $2698.50
  • CLIO Standard Qc: $2851.50
  • CLIO Fw Qc: $3846.00
  • CLIO LITE: $999.00

***Please note: CLIO STANDARD, CLIO Fw and CLIO LITE include the hardware and software along with interface cables to form an integrated measurement system. CLIO Microphones, mic preamps, audio amplifiers or laser interfaces are all optional and not included in the stated prices above.